All orders are assembled and tested after orders are received, please allow 1-2 weeks for delivey
The RWT Oxygen Development SDR comes with the following:
-
RWT Oxygen SDR
-
12 V Power power supply
-
GPIO breakout cable
-
USB3-Type A to USB-C cable
-
USB-C to USB-C cable
-
A microSDXC card which is pre-loaded with the latest release of software for the RWT Oxygen SDR
-
Console/Debug port header extension connector (Samtec ESQ-106-44-L-D)
-
Hard Case for strorage and shipping
RWT Oxygen SDR Development Kit, with a Xilinx Ultrascale+ MPSoC. This software defined radio operates over a frequency span of 70MHz to 6 GHz with 2x RX 2x TX MIMO channels. Includes expansion socket for optional RF daughtercards (LNAs, mixers, etc.) and 12 external 1.8V GPIOs with a standard pluggable connector and 2 USB-C interfaces (1 Upstream Facing Port, 1 Dual Role Port) supporting USB 3.0 speeds
Fully Embedded SDR Solution
- Stream data to a host computer as an IIO device OR operate as a standalone embedded computer
- Operating system built using Yocto/OpenEmbedded
- Radio is controlled using open-source software (GNU Radio, libIIO, and gr-rwt)
- Tethered mode ustilizes gadget ethernet over USB-C connection
FPGA SOMs available in a range of sizes to meet performance and power requirements
- Modular embedded SDR development platform utilizing Trenz TE0820 System On Modules (SOMs) and the Analog Devices AD9361 RF Agile Transceiver
Option | FPGA | ARM A53 Cores | Mali GPU | H.264/5 VCU | Logic Cells | DSP Slices | Block RAM | Ultra RAM |
---|---|---|---|---|---|---|---|---|
2CG | XCZU2CG-1SFVC784 | Dual (1.3GHz) | - | - | 103K | 240 | 5.3Mb | |
3CG | XCZU3CG-1SFVC784 | Dual (1.3GHz) | - | - | 154K | 360 | 7.6Mb | |
4CG | XCZU4CG-1SFVC784 | Dual (1.3GHz) | - | - | 192K | 728 | 4.5Mb | 13.5Mb |
2EG | XCZU2EG-1SFVC784 | Quad (1.5GHz) | Y | - | 103K | 240 | 5.3Mb | |
3EG | XCZU3EG-1SFVC784 | Quad (1.5GHz) | Y | - | 154K | 360 | 7.6Mb | |
4EV | XCZU4EG-1SFVC784 | Quad (1.5GHz) | Y | Y | 192K | 728 | 4.5Mb | 13.5Mb |
- An HDL development environment has been developed similar to GNU Radio out-of-tree modules
The Oxygen Developer SDR is a modular Embedded SDR. The SDR has several options of FPGA size, and a connector for supporting a custom RF "personality" card. It is delivered with a custom Linux distribution, including GNU Radio 3.10. The unit includes a built-in GPS receiver, external GPIO connector using a standard
Oxygen Data Sheet
Open PDF